# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spmi/qcom,x1e80100-spmi-pmic-arb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm X1E80100 SPMI Controller (PMIC Arbiter v7)

maintainers:
  - Stephen Boyd <sboyd@kernel.org>

description: |
  The X1E80100 SPMI PMIC Arbiter implements HW version 7 and it's an SPMI
  controller with wrapping arbitration logic to allow for multiple on-chip
  devices to control up to 2 SPMI separate buses.

  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
  to slave devices.

properties:
  compatible:
    oneOf:
      - items:
          - const: qcom,sar2130p-spmi-pmic-arb
          - const: qcom,x1e80100-spmi-pmic-arb
      - const: qcom,x1e80100-spmi-pmic-arb

  reg:
    items:
      - description: core registers
      - description: tx-channel per virtual slave registers
      - description: rx-channel (called observer) per virtual slave registers

  reg-names:
    items:
      - const: core
      - const: chnls
      - const: obsrvr

  ranges: true

  '#address-cells':
    const: 2

  '#size-cells':
    const: 2

  qcom,ee:
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 0
    maximum: 5
    description: >
      indicates the active Execution Environment identifier

  qcom,channel:
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 0
    maximum: 5
    description: >
      which of the PMIC Arb provided channels to use for accesses

patternProperties:
  "^spmi@[a-f0-9]+$":
    type: object
    $ref: /schemas/spmi/spmi.yaml
    unevaluatedProperties: false

    properties:
      reg:
        items:
          - description: configuration registers
          - description: interrupt controller registers

      reg-names:
        items:
          - const: cnfg
          - const: intr

      interrupts:
        maxItems: 1

      interrupt-names:
        const: periph_irq

      interrupt-controller: true

      '#interrupt-cells':
        const: 4
        description: |
          cell 1: slave ID for the requested interrupt (0-15)
          cell 2: peripheral ID for requested interrupt (0-255)
          cell 3: the requested peripheral interrupt (0-7)
          cell 4: interrupt flags indicating level-sense information,
                  as defined in dt-bindings/interrupt-controller/irq.h

required:
  - compatible
  - reg-names
  - qcom,ee
  - qcom,channel

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    soc {
      #address-cells = <2>;
      #size-cells = <2>;

      spmi: arbiter@c400000 {
        compatible = "qcom,x1e80100-spmi-pmic-arb";
        reg = <0 0x0c400000 0 0x3000>,
              <0 0x0c500000 0 0x4000000>,
              <0 0x0c440000 0 0x80000>;
        reg-names = "core", "chnls", "obsrvr";

        qcom,ee = <0>;
        qcom,channel = <0>;

        #address-cells = <2>;
        #size-cells = <2>;
        ranges;

        spmi_bus0: spmi@c42d000 {
          reg = <0 0x0c42d000 0 0x4000>,
                <0 0x0c4c0000 0 0x10000>;
          reg-names = "cnfg", "intr";

          interrupt-names = "periph_irq";
          interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
          interrupt-controller;
          #interrupt-cells = <4>;

          #address-cells = <2>;
          #size-cells = <0>;
        };
      };
    };
