# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Rockchip DW HDMI QP TX Encoder

maintainers:
  - Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

description: |
  Rockchip RK3588 SoC integrates the Synopsys DesignWare HDMI QP TX controller
  IP and a HDMI/eDP TX Combo PHY based on a Samsung IP block, providing the
  following features, among others:

  * Fixed Rate Link (FRL)
  * Display Stream Compression (DSC)
  * 4K@120Hz and 8K@60Hz video modes
  * Variable Refresh Rate (VRR) including Quick Media Switching (QMS)
  * Fast Vactive (FVA)
  * SCDC I2C DDC access
  * Multi-stream audio
  * Enhanced Audio Return Channel (EARC)

allOf:
  - $ref: /schemas/sound/dai-common.yaml#

properties:
  compatible:
    enum:
      - rockchip,rk3576-dw-hdmi-qp
      - rockchip,rk3588-dw-hdmi-qp

  reg:
    maxItems: 1

  clocks:
    items:
      - description: Peripheral/APB bus clock
      - description: EARC RX biphase clock
      - description: Reference clock
      - description: Audio interface clock
      - description: TMDS/FRL link clock
      - description: Video datapath clock

  clock-names:
    items:
      - const: pclk
      - const: earc
      - const: ref
      - const: aud
      - const: hdp
      - const: hclk_vo1

  interrupts:
    items:
      - description: AVP Unit interrupt
      - description: CEC interrupt
      - description: eARC RX interrupt
      - description: Main Unit interrupt
      - description: HPD interrupt

  interrupt-names:
    items:
      - const: avp
      - const: cec
      - const: earc
      - const: main
      - const: hpd

  phys:
    maxItems: 1
    description: The HDMI/eDP PHY

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description: Video port for RGB/YUV input.

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description: Video port for HDMI/eDP output.

    required:
      - port@0
      - port@1

  power-domains:
    maxItems: 1

  resets:
    maxItems: 2

  reset-names:
    items:
      - const: ref
      - const: hdp

  "#sound-dai-cells":
    const: 0

  rockchip,grf:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Some HDMI QP related data is accessed through SYS GRF regs.

  rockchip,vo-grf:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Additional HDMI QP related data is accessed through VO GRF regs.

required:
  - compatible
  - reg
  - clocks
  - clock-names
  - interrupts
  - interrupt-names
  - phys
  - ports
  - resets
  - reset-names
  - rockchip,grf
  - rockchip,vo-grf

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/power/rk3588-power.h>
    #include <dt-bindings/reset/rockchip,rk3588-cru.h>

    soc {
      #address-cells = <2>;
      #size-cells = <2>;

      hdmi@fde80000 {
        compatible = "rockchip,rk3588-dw-hdmi-qp";
        reg = <0x0 0xfde80000 0x0 0x20000>;
        clocks = <&cru PCLK_HDMITX0>,
                 <&cru CLK_HDMITX0_EARC>,
                 <&cru CLK_HDMITX0_REF>,
                 <&cru MCLK_I2S5_8CH_TX>,
                 <&cru CLK_HDMIHDP0>,
                 <&cru HCLK_VO1>;
        clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
        interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
                     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>,
                     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>,
                     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH 0>,
                     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>;
        interrupt-names = "avp", "cec", "earc", "main", "hpd";
        phys = <&hdptxphy0>;
        power-domains = <&power RK3588_PD_VO1>;
        resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMIHDP0>;
        reset-names = "ref", "hdp";
        rockchip,grf = <&sys_grf>;
        rockchip,vo-grf = <&vo1_grf>;
        #sound-dai-cells = <0>;

        ports {
          #address-cells = <1>;
          #size-cells = <0>;

          port@0 {
            reg = <0>;

            hdmi0_in_vp0: endpoint {
              remote-endpoint = <&vp0_out_hdmi0>;
            };
          };

          port@1 {
            reg = <1>;

            hdmi0_out_con0: endpoint {
              remote-endpoint = <&hdmi_con0_in>;
            };
          };
        };
      };
    };
